QNAP – TS-EC1679U-SAS-RP

Quad Core Intel® Xeon® E3-1245 v2 Processor 3.4 GHz

System memory: 8 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)

Note:

1. When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed.

1. For the information of RAM module installation and compatible NAS models, please refer to the  QNAP RAM Module Installation Guide

512MB DOM

16 x 3.5-inch SAS/SATA 6Gb/s, SAS/SATA 3Gb/s hard drive or 2.5-inch SAS/ SATA, SSD hard drive
NOTE:

1. The standard system is shipped without hard drives.

1. For the hard drive compatibility list, please visit http://www.qnap.com/i/en/product_x_grade/

16 x hot-swappable and lockable tray

4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)

NOTE:

1. For the optional network card compatibility list, please visit http://www.qnap.com/i/en/product_x_grade/cat_intro.php?g_cat=11

1. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.

Status, 10 GbE, LAN, storage expansion port status

2x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.

2 (rear)

System: Power button and reset button

System warning

3U, Rackmount

130(H) x 442.4(W) x 528.3(D) mm
5.12(H) x 17.42(W) x 20.80(D) inch

18.3 kg/ 40.34 lb (Net)
27.38 kg/ 60.36 lb (Gross)

Standby: 54.5dB (low fan speed)
In operation: 62.2 dB (medium fan speed)
(with16 x WD30EZRX-00MMMB0 hard drive installed)

In Operation: 368 W
(with 16 x Seagate ST3600057SS hard drive installed)

0-40˚C

5~95% RH non-condensing, wet bulb: 27˚C

Input: 100-240V AC,50-60Hz
Output: 600W

2 (for network and storage expansion)

3 x 6 cm smart cooling fan