QNAP – TS-EC879U-RP

Quad Core Intel® Xeon® E3-1225 v2 Processor 3.2 GHz

System memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x1
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)

Note:

1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.

1. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide

512MB DOM

8 x 3.5” or 2.5” SATA 6Gb/s, SATA 3Gb/s hard drive or SSD
NOTE:

1. The standard system is shipped without hard drives.

8 x hot-swappable and lockable tray

4 x Gigabit RJ-45 Ethernet port (Optional dual-port 10 Gb and 1 Gb network card are supported)
NOTE:

1. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.

Status, 10 GbE, LAN, eSATA, hard drives

2x USB 3.0 port (rear)
4x USB 2.0 port (rear)

Support USB printer, pen drive, USB hub, and USB UPS etc.

2 (rear)

System: Power button and reset button

System warning

2U, Rackmount

88(H) x 439(W) x 520(D) mm
3.46(H) x 17.28(W) x 20.47(D) inch

Net weight: 12.52 kg/27.61 lb
Gross weight: 20.76 kg/45.78 lb

Standby: 54.57 dB
In operation: 54.6 dB
(with 8 x 1TB hard drives installed)

Sleep mode: 68W
In Operation: 132W
(with 8 x 1TB hard drives installed)

0~40˚C

5~95% RH non-condensing, wet bulb: 27˚C.

Input: 100-240V AC, 47-63Hz
Output: 300W

2 (for network and storage expansion)

3 x 6 cm smart cooling fan